1.結構強度：電纜橋架的寬度增加，對其結構強度的要求也會相應增加。寬度增加后，橋架的自重會增加，同時承載電纜的數量也可能增加，因此電纜橋架的材料和結構設計需要能夠承受這種增加的負荷。

1. Structural strength: As the width of the cable tray increases, the requirements for its structural strength will also increase accordingly. As the width increases, the weight of the cable tray will increase, and the number of cables it can carry may also increase. Therefore, the material and structural design of the cable tray need to be able to withstand this increased load.

2.防振動和防震：隨著寬度的增加，電纜橋架的穩定性和抗振動能力也需要提高。特別是當電纜橋架經過交通道路、機械設備等振動較大的區域時，需要采取一些防震措施，以避免橋架的搖晃和損壞。

2. Anti vibration and anti vibration: As the width increases, the stability and anti vibration ability of cable trays also need to be improved. Especially when cable trays pass through areas with high vibrations such as traffic roads and mechanical equipment, it is necessary to take some seismic measures to avoid the shaking and damage of the cable trays.

3.安裝和維護便利性：寬度較大的電纜橋架需要更多的工藝和材料來制作和安裝，因此需要考慮施工的方便性和可維護性。例如，可以采用分段拼裝的方式，方便運輸和安裝，并且提供便于維護和更換電纜的設計。

3. Convenience of installation and maintenance: Cable trays with larger widths require more craftsmanship and materials for production and installation, so it is necessary to consider the convenience and maintainability of construction. For example, segmented assembly can be used to facilitate transportation and installation, and a design that facilitates maintenance and cable replacement can be provided.

4.美觀性：寬度較大的電纜橋架在外觀上也需要考慮美觀性?？梢愿鶕?jù)實際需求選擇合適的顏色和表面處理方式，使其與建筑物的風格和色彩相協調。

4. Aesthetics: Cable trays with larger widths also need to consider aesthetics in appearance. Suitable colors and surface treatment methods can be selected according to actual needs to coordinate with the style and color of the building.

5.電磁兼容性：電纜橋架在寬度增加時，承載的電纜數量也會增加，電纜之間的干擾可能會增加。因此，電纜橋架的設計需要考慮電磁屏蔽和隔離的要求，以保證電纜傳輸?shù)姆€(wěn)定性和可靠性。

5. Electromagnetic compatibility: As the width of the cable tray increases, the number of cables it carries also increases, and interference between cables may increase. Therefore, the design of cable trays needs to consider the requirements of electromagnetic shielding and isolation to ensure the stability and reliability of cable transmission.

6.泄漏防護：寬度較大的電纜橋架需要考慮泄漏防護的問題。在特定場所，如化工廠、實驗室等，電纜橋架需要具備防腐、防爆等特殊性能，以防止泄漏對環境和人員的危害。

6. Leakage protection: Cable trays with larger widths need to consider leakage protection issues. In specific locations, such as chemical plants, laboratories, etc., cable trays need to have special properties such as anti-corrosion and explosion-proof to prevent leakage and harm to the environment and personnel.