Jinan cable bridge is more and more widely used in electrical engineering or construction. Therefore, installation is a problem. We need to pay attention to the stability of the bridge. In installation, a bridge is related to many factors. The same bridge is stable, and the quality is affected by many factors. Today, how do we solve the problem of cable tray stability.

電纜橋架主要用于電力傳輸階段、電纜和光纖的支撐、保護和管理。當電纜和纖維布線量大時，容易下垂，所以技術人員想到用金屬材料做管道廊道來保護纖維和電纜。然而，傳統全封閉管道的維護是復雜和昂貴的。因此，開放式橋在數據和IDC機房中越來越受歡迎。

Cable tray is mainly used for power transmission stage, cable and optical fiber support, protection and management. When the amount of cable and fiber wiring is large, it is easy to sag, so the technical personnel thought of using metal materials as pipe gallery to protect the fiber and cable. However, the maintenance of traditional closed pipelines is complex and expensive. Therefore, open bridge is more and more popular in data and IDC room.

1. 濟南電纜橋架安裝前注意定位放線，根據施工圖確定位置，并同時畫水平線和垂直線。接下來，固定配件、螺絲和膨脹絲，固定橋架。下一步是對橋架進行調整，使其穩定在設計位置，完全固定。

1. Pay attention to positioning and setting out before installation of Jinan cable bridge, determine the position according to the construction drawing, and draw horizontal and vertical lines at the same time. Next, fix the accessories, screws and expansion wires to fix the bridge. The next step is to adjust the bridge to make it stable in the design position and completely fixed.

2為橋梁設計被動電纜線路的需要提供不同的方向,其中,弱電系統內的電纜應分類布橋,因?yàn)檫@是一個更好的路由和安裝符合要求的走向,結合實際的結構和空調的位置等等。

2. Different directions should be provided for the passive cable line design of bridges. Among them, the cables in weak current system should be arranged by categories, because this is a better route and installation, which meets the requirements of the trend, combined with the actual structure and the location of air conditioning, etc.

濟南電纜橋架

Jinan cable bridge

3.橋梁框架之所以備受關注，是因?yàn)槠湓O(shè)計結構簡單，安裝門檻低，養護費用高。清洗、檢測方便，能適應各種復雜惡劣環境。選擇橋架時，應選擇適合自己的橋架，并注意安裝步驟。

3. The reason why the bridge frame is concerned is that its design structure is simple, the installation threshold is low, and the maintenance cost is high. It is convenient for cleaning and testing, and can adapt to various complex and harsh environments. When selecting the bridge, it is necessary to select the bridge suitable for itself and pay attention to the installation steps.

4,主動被動的電纜不能并排電纜敷設,條件是有限的,如果在同一橋商店,所以他需要采用金屬板設置在中間,這導致電纜,以避免交叉平面,橋穿過地板或膨脹接頭,應留在架構圖和相應的位置,避免施工臨時鉆空的,因?yàn)樗鼤p害民事結構,在橋的設計,為了防止電磁輻射的干擾，應考慮橋梁的密封。

4. The active and passive cables cannot be laid side by side, and the conditions are limited. If they are in the same bridge shop, they need to use metal plates to set them in the middle, which leads to cables to avoid cross plane. The bridge passing through the floor or expansion joint should be left in the framework drawing and corresponding position to avoid temporary drilling in the construction, because it will damage the civil structure in the bridge design, In order to prevent the interference of electromagnetic radiation, the sealing of bridge should be considered.

以上就是今天為大家分享的關于影響濟南電纜橋架穩定性的因素的相關內容，橋梁的穩定性和做工程一定要選擇好的橋梁產品，從基礎到避免以后出現問題。

The above is the related content about the factors that affect the stability of Jinan cable bridge. The bridge stability and engineering must choose good bridge products, from the foundation to avoid future problems.